Difference between Off-Grid and Grid Tied Battery Backup in Inverter

The sizing of the inverter must be considered when you are purchasing an inverter and it is dependent on its surge capability and its constant output rating. The fact whether the device is off-grid or grid tied with the battery supply also has an impact the device’s sizing.

In the case of battery-based off-grid inverter system acquired from any of the trusted power inverters manufacturers, you need to find the sum total of the wattages of all the appliances that run on alternating-current that you want to operate simultaneously using the inverter in the event of a power failure. This amount is referred to as the base load. After this, the appliances that may surge are taken into consideration and the cumulative surge watts are added to our base load in order to determine the surge capacity requirement. For finding the watt ratings of an appliance, you can find it on the nameplate ratings or find it using a watt-meter or you may also ask the manufacturer from whom you have purchased that appliance.

When the grid is tied, you need to examine two operating modes of the CFL inverter or any other inverter, which is when the grid is available and when there is a power outage. When the utility grid is connected, the gird-tied devices will be limited to meting out the power of PV array; hence the device must be large enough to exceed the obtainable array wattage. When there is a blackout, such inverter will change over to the off-grid mode to supply power to just a critical load subpanel, which does not take account of all the AC loads of the home.